Latest Abike Co Deals - 2012
Abike Co products, discounts, deals and sales
Abike Co Edwin Grips
Abike Co Edwin Grips are the signature grip from the street shredder Edwin Delarosa - A soft mushroom style grip constructed from Krayton rubber - Comes supplied with barends.
- Evans Cycles
Brand:
Abike Co
Abike Co Slick Cable
The Abike Co Slick Cable is a smooth tough slick brake cable.
- Evans Cycles
Brand:
Abike Co
Abike Co Illegal Liner Cable
The Abike Co Illegal Linear Cable does not wind up when doing barspins or tailwhips. Available in a variety of colours. Improves the performance of single cable braking.
- Evans Cycles
Brand:
Abike Co
Abike Co Hamilton Plastic Pedals
Abike Co Hamilton Plastic Pedals. Low cost, lightweight and less likely to rip apart your shins than an alloy model!
- Evans Cycles
Brand:
Abike Co
Abike Co Pivotal Seat Post
The Abike Co Pivotal Seat Post is a small stump post from Abike in an array of colours. The top has been slimmed down to save weight but also allowing the post to be completely slammed!
- Evans Cycles
Brand:
Abike Co
Abike Co Wedge Pivotal Post
The Abike Co Wedge Pivotal Post works with any seat using Pivotal technology, enables the seat post to be secured to the frame using the same bolt that is in the seat. This provides a simpler setup and cleaner look.
- Evans Cycles
Brand:
Abike Co
Abike Co Wedge Pivotal Stump Post
The Original Abike Co Wedge post is now available in this super tidy stump post design. The Abike Co Wedge Pivotal Stump Post works with any seat using Pivotal technology, enables the seat post to be secured to the frame using the same bolt that is in the seat. This provides a simpler setup and cleaner look.
- Evans Cycles
Brand:
Abike Co
Abike Co Jump Off Remix Stem
The Abike Co Jump Off Remix Stem. Featuring the same drop and 48mm reach as the original jump off, the remix is Abike Co's latest version of their front load stem. Forged and CNC'd with more material removed to save weight while maintaining the trusted strength and also featuring hollow bolts.
- Evans Cycles
Brand:
Abike Co
Abike Co Edwin De La Rosa Grip - Flangeless
Abike Co Edwin De La Rosa Grip - Flangeless. Rivalling the ODI Longneck as one of the most popular and nicest feeling BMX grips ever made, the Animal Edwin De la Rosa grip now comes flangeless for those who don't like flanges!
- Evans Cycles
Brand:
Abike Co
Abike Co Kotulak Multi-Tool
The Abike Co Kotulak multi-tool has everything needed to assemble and work on most modern BMX bikes, all packaged in a durable all steel body and cap.
- Evans Cycles
Brand:
Abike Co
Abike Co Sway Bar
The Abike Co Sway Bar are 13 butted heat-treated 4130 chromoly. They are 27.5" wide, 7.9" high, with 2.5 degrees of upsweep, 10.5 degrees of backsweep and have a .75" crossbar.
- Evans Cycles
Brand:
Abike Co
Abike Co Plastic Bar Ends
The ABike Co Plastic Bar Ends have a simple press fit design that uses linear flexible ribs to stay snug in the bars.
- Evans Cycles
Brand:
Abike Co
Abike Co Nigel Sylvester Signature Seat
The ABike Co Nigel Sylvester Signature Seat is the first Pivotal seat to use animal's new base which is the first to rethink the structure of a Pivotal seat. The extra strong and clean design is covered with a not too thick/not too thin amount of padding and then wrapped with a durable vinyl cover that is debossed with the animal logo and Nigel's signature. To access the hollow aluminium bolt, the included 6mm allen key goes through the embroidered eye of the logo.
- Evans Cycles
Brand:
Abike Co
Abike Co Akimbo Cranks
The ABike Co Akimbo Cranks where designed with the help of FEA to be a set of extremely strong, but not overbuilt, 3-piece cranks, the Akimbo cranks have 175mm arms with a smooth shape with a laser etched logo and are made with heat-treated 4130 chromoly. The 22mm, 48 spline hollow spindle attaches to the arms via spindle bosses, that fit standard crank arm bolts and micro-drive bolts, and hollow more info >>
- Evans Cycles
Brand:
Abike Co
Abike Co Javelin Right Handed Rear Cassette Hub
The ABike Co Javelin Right Handed Rear Cassette Hub is CNC'd from 7075 aluminium, the shells have a smaller non-drive side flange for better flange protection and come with a 9T driver. The one-piece chromoly driver uses two polymer bushings, instead of a set of small bearings, for longer life. The 14mm chromoly axle is hollow and has a 8mm hex broach and colour matched 7075 aluminium axle nuts. Available in LHD or RHD configurations.
- Evans Cycles
Brand:
Abike Co
Abike Co Javelin Left Handed Rear Cassette Hub
The ABike Co Javelin Left Handed Rear Cassette Hub is CNC'd from 7075 aluminium, the shells have a smaller non-drive side flange for better flange protection and come with a 9T driver. The one-piece chromoly driver uses two polymer bushings, instead of a set of small bearings, for longer life. The 14mm chromoly axle is hollow and has a 8mm hex broach and colour matched 7075 aluminium axle nuts. Available in LHD or RHD configurations.
- Evans Cycles
Brand:
Abike Co
Abike Co Seat Clamp
The ABike Co Seat Clamp is simple, lightweight and effective with a single clamping bolt and available in four colours to match your bike.
- Evans Cycles
Brand:
Abike Co
Abike Co Integrated Headset
The ABike Co Integrated Headset is a Campy spec integrated headset with sealed cartridge bearings, aluminium upper cover with internal O-ring for a tight fit and laser etched Animal logos for a clean look. Includes 5mm and 7mm headset spacers.
- Evans Cycles
Brand:
Abike Co
Abike Co Hamilton Pedals
The ABike Co Hamilton Pedals are a simple and strong design that is available with either sealed or unsealed bearings. The traction pins screw in from the underside of the pedal and come in different lengths to fine tune the desired grip level.
- Evans Cycles
Brand:
Abike Co
Abike Co Hamilton Sealed Bearing Pedals
The ABike Co Hamilton Sealed Bearing Pedals are a simple and strong design that is available with either sealed or unsealed bearings. The traction pins screw in from the underside of the pedal and come in different lengths to fine tune the desired grip level.
- Evans Cycles
Brand:
Abike Co
Abike Co Mid PC Bottom Bracket
The Abike Co Mid PC Bottom Bracket is a mid bearing bottom bracket kit with polycarbonate cones and 6061 aluminium cores, includes; cones, bearings, internal spacer and adjustment washers.
- Evans Cycles
Brand:
Abike Co
Abike Co Butcher Peg
The Abike Co Butcher Peg is a Forged and CNC'd 7075 aluminium peg with optional plastic sleeve, allows grinding of surfaces that don't work well with steel pegsSize: 34mm x 100mm (aluminium), 40mm x 100mm (plastic sleeve), 14mm with 10mm adapter. Sleeve only available in black.
- Evans Cycles
Brand:
Abike Co
Abike Co Linog Peg
The Abike Co Linog Peg is a forged and CNC'd heat-treated 4140 chromoly long lasting peg with internal butting with radial spine to support peg as it thinsSizes: 1.5" x 4" and 1.5" x 4.5", 14mm with 10mm adapter.
- Evans Cycles
Brand:
Abike Co
Abike Co Javelin Front Hub
The ABike Co Javelin Front Hub a low flanged, 36 hole hub, the Javelined front hub is CNC'd from 7075 aluminium and features a female axle design. The 7075 aluminium cone spacers feature a stainless steel bearing contact to prevent deformation/binding that happens to aluminium cones over time. Both the hollow axle (with a hex broach) and the bolts are chromoly for durability.
- Evans Cycles
Brand:
Abike Co
Abike Co Capped Axle Nuts
The Abike Co Capped Axle Nuts are available in 4 anodized colours and 10 or 14mm.
- Evans Cycles
Brand:
Abike Co
